Search Results

Standard

Alloy and Temper Designation Systems for Aluminum

2018-01-09

CURRENT

J993_201801

This standard provides systems for designating wrought aluminum and wrought aluminum alloys, aluminum and aluminum alloys in the form of castings and foundry ingot, and the tempers in which aluminum and aluminum alloy wrought products and aluminum alloy castings are produced.

Standard

ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM

1989-01-01

HISTORICAL

J993_198901

This standard provides systems for designating wrought aluminum and wrought aluminum alloys, aluminum and aluminum alloys in the form of castings and foundry ingot, and the tempers in which aluminum and aluminum alloy wrought products and aluminum alloy castings are produced.

Standard

ALUMINUM ALLOYS - FUNDAMENTALS

1989-01-01

HISTORICAL

J451_198901

This information report is intended to give general data on the properties of aluminum and information on working, joining, forming, machining, finishing, and heat treating of aluminum.

Standard

Aluminum Alloys - Fundamentals

2018-01-10

CURRENT

J451_201801

This information report is intended to give general data on the properties of aluminum and information on working, joining, forming, machining, finishing, and heat treating of aluminum.

Standard

ACOUSTIC EMISSION TEST METHODS

1991-03-01

HISTORICAL

J1242_199103

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.

Standard

ACOUSTIC EMISSION TEST METHODS

1988-12-01

HISTORICAL

J1242_198812

Standard

ACOUSTIC EMISSION TEST METHODS

1978-06-01

HISTORICAL

J1242_197806

Standard

ACOUSTIC EMISSION TEST METHODS

1983-06-01

HISTORICAL

J1242_198306

Standard

Acoustic Emission Test Methods

2018-01-09

CURRENT

J1242_201801

The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information can be obtained by referring to Section 2.

Standard

High-Strength, Hot-Rolled Steel Bars

2003-09-24

CURRENT

J1442_200309

This SAE Recommended Practice covers two levels of high strength structural low-alloy steel bars having minimum Yield Points of 345 MPa (50 ksi) and 450 MPa (65 ksi). The two strength levels are 345 and 450 MPa or 50 and 65 ksi minimum yield point. Different chemical compositions are used to achieve the specified mechanical properties. In some cases there are significant differences in chemical composition for the same strength level, depending on the fabricating requirements. It should be noted that although the mechanical properties for a steel grade sourced from different suppliers may be the same, the chemical composition may vary significantly. The fabricator should be aware that certain compositional differences may effect the forming, welding, and/or service requirements of the material. It is therefore recommended that the fabricator consult with the producer to understand the effect of chemical composition.

Standard

Glossary of Carbon Steel Sheet and Strip Terms

2019-07-29

CURRENT

J940_201907

This glossary is intended to provide engineers, metallurgists, and production personnel with uniform definitions of commonly used carbon sheet and strip terms. The glossary serves to supplement information and photographs reported in SAE J810, J763, J877, J863, and J403. Many of the terms listed apply only to hot-dipped zinc-coated products or to uncoated products. The letter C following the term identifies a term applying to coated materials, while the letters NC identify a term applying to uncoated materials. Where no identification is provided, the term is common to both.

Standard

Automotive Austempered Ductile (Nodular) Iron Castings (ADI)

2018-01-09

CURRENT

J2477_201801

This SAE Standard covers the mechanical and physical property requirements for Austempered Ductile Iron (ADI) castings used in automotive and allied industries. Specifically covered are: a Hardness b Tensile Strength c Yield Strength d Elongation e Modulus of Elasticity f Impact Energy g Microstructure In this document SI units are primary and in-lb units are derived. Appendix A provides general information and related resources on the microstructural, chemical and heat treatment requirements to meet the mechanical properties needed for ADI in particular service conditions and applications.

Standard

Automotive Austempered Ductile (Nodular) Iron Castings (ADI)

2004-05-26

HISTORICAL

J2477_200405

This SAE Standard covers the mechanical and physical property requirements for Austempered Ductile Iron (ADI) castings used in automotive and allied industries. Specifically covered are: a Hardness b Tensile Strength c Yield Strength d Elongation e Modulus of Elasticity f Impact Energy g Microstructure In this document SI units are primary and in-lb units are derived. Appendix A provides general information and related resources on the microstructural, chemical and heat treatment requirements to meet the mechanical properties needed for ADI in particular service conditions and applications.

Standard

Properties of Galvanized Low Carbon Sheet Steels and Their relation to Formability

1997-09-01

CURRENT

J1852_199709

The purpose of this SAE Information Report is to describe those properties of galvanized low carbon sheet steel which relate to its formability; that is, its ability to be formed with the structural, dimensional and surface integrity to fulfill the design intent.

Standard

OIL TEMPERED CARBON STEEL SPRING WIRE AND SPRINGS

1988-12-01

HISTORICAL

J316_198812

This specification covers the mechanical, chemical, and dimensional requirements of oil tempered carbon steel spring wire used in the automotive and related industries. It is especially intended for the manufacture of mechanical springs and wire forms which are not subjected to a large number of high stress cycles. Class I wire is intended for moderate stress and Class II for higher stress level applications. This specification also covers the basic material and heat treat requirements for springs fabricated from this wire.

Standard

Automotive Compacted Graphite Iron Castings

2007-12-17

HISTORICAL

J1887_200712

This SAE Standard covers the mechanical and physical requirements for Compacted Graphite Iron (CGI) castings used in automotive and allied industries. Requirements in this document include: a Tensile Strength b Yield Strength c Elongation d Graphite Morphology

Standard

Automotive Compacted Graphite Iron Castings

2018-02-15

CURRENT

J1887_201802

This SAE Standard covers the mechanical and physical requirements for Compacted Graphite Iron (CGI) castings used in automotive and allied industries. Requirements in this document include: a Tensile Strength b Yield Strength c Elongation d Graphite Morphology

Standard

WELDING, BRAZING, and SOLDERING—MATERIALS AND PRACTICES

1976-07-01

HISTORICAL

J1147_197607

Standard

WELDING, BRAZING, AND SOLDERING—MATERIALS AND PRACTICES

1983-06-01

HISTORICAL

J1147_198306

The Joint AWS/SAE Committee on Automotive Welding was organized on January 16, 1974, for the primary purpose of facilitating the development and publication of various documents related to the selection, specification, testing, and use of welding materials and practices, particularly for the automotive and related industries. A secondary purpose is the dissemination of technical information.

Standard

Welding, Brazing, and Soldering - Materials and Practices

2018-01-09

CURRENT

J1147_201801

The Joint AWS/SAE Committee on Automotive Welding was organized on January 16, 1974, for the primary purpose of facilitating the development and publication of various documents related to the selection, specification, testing, and use of welding materials and practices, particularly for the automotive and related industries. A secondary purpose is the dissemination of technical information.